Tile by IDAS, Inc.

material:	sand-casted solid brass (recycled material)
size:	4 inch by 4 inch (nominal)
	3 7/8 inch by 3 7/8 inch (actual)
thickness:	1/4 inch (rim)
	1/8 inch (body)
weight:	7 to 8 ounces
finish:	natural brass which ages over time
	to become antique brass

Inspiration:

The patterns are based upon the natural environment:

Grass from grasslands, Reed from a riverbank, Sand from desert, and Weave from forest.

Patterns:

Grass and Reed each have four variations for a naturally, random appearance.

(Only one variation of each is shown in the photos.)

Sand and Weave each only have one variation.

Please select your preferences.

Recommended Use & Requirements:

Tiles can be used as accent or field tiles.

Suitable for residential and light commercial indoor vertical applications.

If used in wet areas, a sealer is recommended.

Installation & Maintenance:

1/8 inch grout line.

Use an epoxy mortar i.e. Laticrete Latapoxy #310.

Johnson’s paste wax sealer where necessary.

Use non-sanded epoxy grout.

Always inspect material prior to installation. Installed material cannot be accepted for return or credit.

Always lay out material prior to installation to properly blend and balance color.

Please note:

Slight differences in color, shade, surface texture and size are natural characteristics of the

cast solid brass tile, as a result of the custom handmade casting process and should be expected.

Images shown are representative, but may not indicate all variations in these characteristics.